Skip to content

Use a Proxy Server

If your network configuration uses a proxy server, you can configure Volt MX Iris to recognize it, whether it is a Basic or NTLM proxy. If yours is an NTLM proxy server, you must follow the procedures for both the Basic proxy and the NTLM proxy.

Basic Proxy Configuration

NTLM Proxy Configuration

Basic Proxy Configuration

Configuring Volt MX Iris to recognize a Basic proxy server involves the following procedures:

Configure the Proxy Server in Volt MX Iris

Configure a Manual Proxy for Your Computer

Configure the Proxy Server in Volt MX Iris

If your network configuration uses a proxy server, you can configure Volt MX Iris to recognize the specific proxy configured.

If you have not configured the Proxy Server during the Installation process, you can enable Proxy configuration and edit the Proxy Settings through the Preferences section in Volt MX Iris.

To configure the proxy server in Volt MX Iris, follow these steps:

  1. In Volt MX Iris, click Edit > Preferences.
    The Iris Preferences window appears.
  2. Click the Proxy tab.
  3. Under the Proxy Settings section, select the Enable Proxy check box.

    4. From the Proxy Type list, select the type of the Proxy Service that you want to configure, either Basic or NTLM.

    Note: You can only configure a BASIC Proxy.

  4. In the Proxy Host text box, enter the value of the proxyHost.

  5. In the Proxy Port text box, enter the value of the proxyPort.
  6. In the Proxy Username text box, enter the username to sign in to the Proxy Server.
  7. In the Proxy Password text box, enter the password to sign in to the Proxy Server.
  8. In the No Proxy Hostnames text box, enter the URL of the domain that must bypass the Proxy server. You can also provide a list of URLs separated by commas.
  9. After you provide all the inputs, click Validate to verify the connection.
    Once all the details are validated, the Done button is enabled.
  10. Click Done.

Configure a Manual Proxy for Your Computer

In addition to configuring Volt MX Iris to recognize the proxy server, your operating system needs to be configured, as well. Doing so differs between Mac and Windows computers.

Configure a Manual Proxy for a Mac

Configure a Manual Proxy for Windows

Configure a Manual Proxy for a Mac

To configure a manual proxy for a Mac, do the following:

  1. Click the Apple menu, next click System Preferences, and then click Network.
  2. From the list, select the network service you are using, such as Wi-Fi or Ethernet.
  3. Click Advanced, and then click Proxies.
  4. From the Select a protocol to configure list, clear the check box for Auto Proxy Discovery and Automatic Proxy Configuration.
  5. From the Select a protocol to configure list, check the check box for Web Proxy (HTTP).
  6. With Web Proxy (HTTP) selected, in the Web Proxy Server text box, enter the proxyHost value.

    Important: For an NTLM proxy server, the Web Proxy Server value should be 127.0.0.1.

  7. In the accompanying port text box, enter the proxyPort value.

    Important: For an NTLM proxy server, the Port value should be 3128.

  8. Repeat steps 5 through 7 for the Secure Web Proxy (HTTPS) protocol and the FTP Proxy protocol.

  9. Check the Exclude simple host names check box.
  10. Click OK.

Configure a Manual Proxy for Windows

To configure a manual proxy for Windows, do the following:

  1. Click the Start menu, and then click Settings (for Windows 10) or Control Panel (for Windows 7 and earlier).
  2. In the search box, type Internet options, and then press Enter.
  3. From the search results, click Internet options. Doing so brings up the Internet Properties dialog box.
  4. Click the Connections tab, and then click LAN Settings.

  5. Clear the Automatically detect settings check box.

  6. Under Proxy server, check the check box for using a proxy server for your LAN.
  7. In the Address text box, enter the proxyHost value.

    Important: For an NTLM proxy server, the Address value should be 127.0.0.1.

  8. In the Port text box, enter the proxyPort value.

    Important: For an NTLM proxy server, the Port value should be 3128.

  9. Check the check box for Bypass proxy server for local addresses.

    Your settings should look something like this (settings shown are for an NTLM proxy server):

  10. Click OK, and then click OK again.

NTLM Proxy Configuration

To configure Volt MX Iris to recognize an NTLM proxy server, you must follow all the procedures related to both the Basic proxy and the NTLM proxy. If you have not yet followed the procedures for a Basic proxy, see Basic Proxy Configuration. Once you have done so, completing the NTLM proxy configuration involves two additional tasks.

Run a Cntlm Process

Allow CONNECT Requests from Non-SSL Connections and Ports

White-List Essential Domains

Run a Cntlm Process

Cntlm is an HTTP proxy that efficiently provides NTLM authentication on the fly. Cntlm integrates TCP/IP port forwarding, SOCKS5 proxy mode, and standalone proxy configuration to allow intranet, Internet, and corporate web server access with NTLM protection.

You run the Cntlm process configured with the proper NTLM host and port information, and any additional needed authentication data.

For more information, refer to the following links:

The Cntlm Authentication Proxy web site

Download Cntlm

Cntlm Documentation

Allow CONNECT Requests from Non-SSL Connections and Ports

By default, proxies such as Squid and ISA do not allow http CONNECT requests from non-SSL connections and ports it deems unsafe. As a result, the proxy server has to be explicitly configured to allow such connections and ports. To do so, contact your system administrator and request that CONNECT requests from non-SSL connections and ports be allowed.

White-List Essential Domains

Volt MX Iris access particular domains that the proxy server must be configured to allow. Contact your system administrator and request that the following domains be white-listed:

https://manage.hclvoltmx.com
https://api.voltmx.com
https://visualization.voltmx.com
https://prototypetransit.voltmx.com.s3.amazonaws.com
https://accounts.auth.voltmxcloud.com